LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> FX50 >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (With Rear Active Steer) >> Function Diagnosis >> Diagnosis System (RAS Control Unit) >> CONSULT-III Function >> Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor Mode

Display Item List

DISPLAY ITEM LIST

Monitor item (Unit) Remarks
VHCL SPEED SE [km/h] or [mph] The vehicle speed signal from ABS actuator and electric unit (control unit) is indicated via CAN communication line.
STEERING ANG [°] The steering angle sensor signal from the steering angle sensor is indicated via CAN communication line.
ENGINE SPEED (RPM) The engine speed signal from ECM is indicated via CAN communication line.
POWER STR SOL [A] The current value of the power steering solenoid valve is indicated.
RR ST ANG-MAI [V] The voltage of the rear wheel steering angle sensor (main) is indicated.
RR ST ANG-SUB [V] The voltage of the rear wheel steering angle sensor (sub) is indicated.
RR ST ANG-VOL [V] The power supply voltage of the rear wheel steering angle sensor is indicated.
C/U VOLTAGE [V] The power supply voltage value of RAS control unit is indicated.
MOTOR VOLTAGE [V] The voltage value of RAS motor is indicated.
MOTOR CURRENT [A] The current value of RAS motor is indicated.
MTR CRNT OPE [A] The current value input to RAS motor is indicated.
RR ANGLE OPE [°] The angle command value is indicated for activating RAS motor.
STOP LAMP SW [On/Off] The stop lamp switch status is indicated.
HICAS RELAY [On/Off] RAS motor relay condition is indicated.
FAILSAFE [On/Off] The fail-safe mode status of RAS control unit is indicated.
WARNING LAMP [On/Off] RAS warning lamp ON/OFF condition is indicated.
scientia non olet · About LEMON Manuals