Component Description
COMPONENT DESCRIPTION CHART
| Name | Function |
|---|---|
| TCM | The TCM consists of a microcomputer and connectors for signal input and output and for power supply. The TCM controls the A/T. |
| PNP switch | "DESCRIPTION " |
| Revolution sensor | "DESCRIPTION " |
| Turbine revolution sensor 1 | "DESCRIPTION " |
| Turbine revolution sensor 2 | |
| A/T fluid temperature sensor | "DESCRIPTION " |
| Input clutch solenoid valve | "DESCRIPTION " |
| Front brake solenoid valve | "DESCRIPTION " |
| Direct clutch solenoid valve | "DESCRIPTION " |
| High and low reverse clutch solenoid valve | "DESCRIPTION " |
| Low brake solenoid valve | "DESCRIPTION " |
| Anti-interlock solenoid valve | "DESCRIPTION " |
| 2346 brake solenoid valve | "DESCRIPTION " |
| Line pressure solenoid valve | "DESCRIPTION " |
| Torque converter clutch solenoid valve | "DESCRIPTION " |
| Accelerator pedal position sensor | "DESCRIPTION " |
| Throttle position sensor | |
| Manual mode switch | "DESCRIPTION " |
| Paddle shifter | "DESCRIPTION " |
| Starter relay | "DESCRIPTION " |
| A/T CHECK indicator lamp | When the ignition switch is pushed to the ON position, the light comes on for 2 seconds. |
| Stop lamp switch | "DESCRIPTION " |
| ECM | "SYSTEM DESCRIPTION " |
| BCM | "SYSTEM DESCRIPTION " |
| Unified meter and A/C amp. | "METER SYSTEM : SYSTEM DESCRIPTION " |
| ABS actuator and electric unit (control unit) | "SYSTEM DESCRIPTION " |
| Wheel sensor | "DESCRIPTION " |
| Yaw rate/side G sensor | "DESCRIPTION " |