BOSE AMP. : Diagnosis Procedure
- CHECK FUSE
Check for blown fuses.
BLOWN FUSES REFERENCE CHARTPower source Fuse No. Battery 5, 8 Ignition switch ACC or ON 19 Is the inspection result normal?
YES: GO TO 2.
NO: Be sure to eliminate cause of malfunction before installing new fuse.
- CHECK POWER SUPPLY CIRCUIT
Check voltage between BOSE amp. harness connector and ground.
CONNECTOR TERMINALS VOLTAGE REFERENCE CHARTSignal name Connector No. Terminal No. Ignition switch position Value (Approx.) Battery power supply B42 50 OFF Battery voltage 51 ACC power supply B41 16 ACC Battery voltage Is the inspection result normal?
YES: GO TO 3.
NO: Check harness between BOSE amp. and fuse.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect BOSE amp. connector.
- Check continuity between BOSE amp. harness connector and ground.CONNECTOR TERMINALS CONTINUITY REFERENCE CHART
Signal name Connector No. Terminal No. Ignition switch position Continuity Ground B42 47 OFF Existed 52 Is the inspection result normal?
YES: INSPECTION END
NO: Repair harness or connector.