Physical Values
PHYSICAL VALUES REFERENCE CHART
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 2 (P) | 3 (L) | Sound signal LH | Output | Ignition switch ON | Sound output | |
| 4 (BR) | 5 (Y) | Voice guidance signal | Output | Ignition switch ON | Sound output | |
| 6 (P) | 15 (B) | Steering switch signal A | Input | Ignition switch ON | Keep pressing SOURCE switch. | 0 V |
| Keep pressing UP switch. | 1.0 V | |||||
| Keep pressing DOWN switch. | 2.0 V | |||||
| Keep pressing TALK switch | 3.0 V | |||||
| Keep pressing ENTER switch. | 4.0 V | |||||
| Except for above. | 5.0 V | |||||
| 7 (GR) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (L) | Ground | Illumination signal | Input | OFF | Lighting switch is OFF. | 0 V |
| Lighting switch is ON. | 12.0 V | |||||
| 10 (B) | - | Shield | - | - | - | - |
| 11 (R) | 12 (G) | Sound signal RH | Output | Ignition switch ON | Sound output | |
| 16 (L) | 15 (B) | Steering switch signal B | Input | Ignition switch ON | Keep pressing VOL DOWN switch. | 0 V |
| Keep pressing VOL UP switch. | 1.0 V | |||||
| Keep pressing switch. | 2.0 V | |||||
| Keep pressing switch. | 3.0 V | |||||
| Except for above. | 5.0 V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 21 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 22 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 23 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 24 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 25 (V) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 26 (G) | 27 | Microphone VCC | Output | Ignition switch ON | - | 5.0 V |
| 28 (R) | 27 | Microphone signal | Input | Ignition switch ON | Give a voice | |
| 35 (G) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 36 (SB) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON | 0 V |
| Parking brake OFF | ||||||
| 37 (O) | Ground | Reverse signal | Input | Ignition switch ON | R position | 12.0 V |
| Other than R position | 0 V | |||||
| 38 (GR) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25 MPH) |
NOTE:
Maximum voltage may be 12.0 V due to specifications (connected units).
|
| 40 (GR) | Ground | Camera connection recognition signal | Input | Ignition switch ON | Connected to camera control unit connector. | 0 V |
| Not connected to camera control unit connector. | 5.0 V | |||||
| 42 (B) | Ground | Control signal 2 | Input | Ignition switch ON | - | 0 V |
| 48 (V) | - | AV communication signal (H) | Input/Output | - | - | - |
| 49 (LG) | - | AV communication signal (L) | Input/Output | - | - | - |
| 50 (G) | - | AV communication signal (H) | Input/Output | - | - | - |
| 51 (R) | - | AV communication signal (L) | Input/Output | - | - | - |
| 52 (L) | - | CAN-H | Input/Output | - | - | - |
| 53 (P) | - | CAN-L | Input/Output | - | - | - |
| 61 (W) | Ground | RGB signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 62 (B) | Ground | RGB signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 63 (R) | Ground | RGB signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 64 | - | Shield | - | - | - | - |
| 65 (G) | Ground | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 66 | - | Shield | - | - | - | - |
| 67 (B) | Ground | RGB area (YS) signal | Output | Ignition switch ON | At RGB image displayed | 5.0 V |
| At rear view camera image is displayed. | ||||||
| 68 (R) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 69 (W) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch ON | - | |
| 70 (L) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display brightness. | |
| 71 (P) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display brightness. | |
| 72 | - | Shield | - | - | - | - |
| 79 (R) | 95 (W) | iPod sound signal LH | Input | Ignition switch ON | When iPod mode is selected. | |
| 80 (B) | 96 (G) | iPod sound signal RH | Input | Ignition switch ON | When iPod mode is selected. | |
| 81 | - | Shield | - | - | - | - |
| 85 (SB) | Ground | Disk eject signal | Input | - | Pressing the eject switch | 0 V |
| Except for above | 5.0 V | |||||
| 86 | - | Shield | - | - | - | - |
| 87 (W) | 88 (B) | AUX sound signal LH | Input | Ignition switch ON | When AUX mode is selected. | |
| 102 (BR) | Ground | Switch ground | - | Ignition switch ON | - | 0 V |
| 103 (R) | 88 (B) | AUX sound signal RH | Input | Ignition switch ON | When AUX mode is selected. | |
| 106 | - | AM-FM main | Input | - | - | - |
| 107 | Ground | Antenna amp. ON signal | Input | Ignition switch ON | - | 12.0 V |
| 108 | Ground | Satellite antenna signal | Input | Ignition switch ON | Not connected to satellite antenna connector. | 5.0 V |
| 109 | - | Shield | - | - | - | - |
| 110 | Ground | GPS antenna signal | Input | Ignition switch ON | Not connected GPS antenna connector. | 5.0 V |
| 111 | - | Shield | - | - | - | - |