Adjust Offset Of Rear View Camera

Use this mode to adjust the guide line display position of the rearview monitor if necessary after removing the rear view monitor camera.

Fig 1: Guide Line - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.

Vehicle CAN Diagnosis

CAN communication status and error counter is displayed.
The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.

The error counter is erased if reset.

Fig 2: CAN Communication Status - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.

ERROR COUNTER REFERENCE CHART

AV COMM Diagnosis

Displays the communication status between AV control unit (master unit) and each unit.
The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.

If it resets, the error counter is erased.

Fig 3: Communication Status - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.

ERROR COUNTER REFERENCE CHART

Delete Unit Connection Log

Deletes any unit connection records and error records from the AV control unit memory. (Clear the records of the unit that has been removed)

Fig 4: Delete Connection Log - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.

Initialize Settings

Initializes the AV control unit memory.

Fig 5: Initialize Settings - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.