Camera Cont.

The two functions of "Connection Confirmation" and "Adjust Offset of Rear View Camera" are available.

CONNECTION CONFIRMATION

The steering angle sensor, reverse signal and vehicle speed sensor can be inspected.

Fig 1: Connection Confirmation - Screen Display

Courtesy of NISSAN MOTOR CO., U.S.A.

VEHICLE STATUS REFERENCE

Diagnosis item	Display	Vehicle status
Steer. Angle Sensor	ON	When steering the vehicle with ignition switch ON (remains ON until connection mode is stopped when it is turned ON)
	OFF	Ignition switch at ACC No steering with ignition switch ON
	-	Malfunction detected in camera connection recognition signal
Reverse Sensor	ON	Selector lever is in "R" with ignition switch ON.
	OFF	Ignition switch at ACC Selector lever is in position other than "R" with ignition switch ON.
	-	Malfunction detected in camera-connection recognition signal
Vehicle Speed Sensor	ON	Vehicle speed is more than 0 km/h (0 MPH) with ignition switch ON
	OFF	Ignition switch at ACC Vehicle speed is 0 km/h (0 MPH) with ignition switch ON
	-	Malfunction detected in camera connection recognition signal
Side view Switch	-	Not used