DRIVER SIDE : Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "RECLN SW-FR", "RECLN SW-RR" in the "Data monitor" mode using CONSULT-III.
- Check reclining switch signal under the following conditions.MONITOR ITEM CONDITION CHART
Monitor item Condition Status RECLINE SW-FR Reclining switch (forward) Operate ON Release OFF RECLINE SW-RR Reclining switch (backward) Operate ON Release OFF Is the indication normal?
YES: Reclining switch function is OK.
NO: Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".