REMOTE KEYLESS ENTRY FUNCTION : Component Description
ITEM FUNCTION CHART
| Item | Function |
|---|---|
| BCM | Controls the door lock function and trunk open function |
| IPDM E/R | Sounds horn via CAN communication between BCM |
| Door lock actuator | Inputs lock/unlock signal from BCM and locks/unlocks each door |
| Door switch | Inputs door open/close condition to BCM |
| Key slot | Inputs key insert/remove signal to BCM |
| Remote keyless entry receiver | Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM |
| Combination meter | Hazard warning lamp is installed to combination meter |
| Unified meter and A/C amp. | Transmits vehicle seep signal to CAN communication line |
| Intelligent Key | Transmits button operation to remote keyless entry receiver |
| Trunk lid opener actuator | Opens the trunk lid after receiving the open signal from retractable hard top control unit or BCM |
| Trunk lid opener cancel switch | Cancels the trunk open operation |
| Fuel lid lock actuator | Inputs lock/unlock signal from BCM and lock/unlocks fuel filler lid |
| Push-button ignition switch | Input push-button ignition switch ON/OFF condition to BCM |
| Intelligent Key warning buzzer | Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound |
| Hazard warning lamp | Warns the user of the door lock/unlock condition and in appropriate operations with the lamps blink |
| Retractable hard top control unit | Controls the retractable hard top system |