LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> G37 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - G37 (Convertible) - System & Component Checks, Ecu Diagnosis Information, Symptom Diagnosis, Precaution & Preparations, Periodic Maintenance, Removal And Installation, Service Data And Specifications (SDS) >> Cooling Fan >> Component Inspection (Cooling Fan Relay)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Cooling Fan Relay)

  1. CHECK COOLING FAN RELAY
    1. Turn ignition switch OFF.
    2. Remove cooling fan relay.
    3. Check the continuity between cooling fan relay terminals under the following conditions.
    TERMINAL CONTINUITY REFERENCE CHART

    Terminals Conditions Continuity
    3 and 5 12 V direct current supply between terminals 1 and 2 Existed
    No current supply Not existed
    Fig 1: Checking Continuity Between Cooling Fan Relay Terminals
    G05733502Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace cooling fan relay.

scientia non olet · About LEMON Manuals