Battery Saver System

When all the following conditions are met for 60 minutes, the battery saver system cuts off the power supply to prevent battery discharge.

• The ignition switch is in the ACC position
• All doors are closed
• Selector lever is in the P position

Reset Condition of Battery Saver System

A/T models 

In order to prevent the battery from discharging, the battery saver system cuts off the power supply when all doors are closed, the selector lever is in the P position, and the ignition switch is left in the ACC position for 60 minutes. If any of the following conditions are met the battery saver system is released and the steering changes automatically to the lock position from the OFF position.

• Opening any door
• Operating door lock using door request switch
• Operating door lock using Intelligent Key

Press push-button ignition switch and ignition switch changes to the ACC position from the OFF position.

M/T models 

If any of the above conditions are met, the battery saver system is released but the steering is not lock.

In this case, the steering operation OFF to LOCK is prohibited.