April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

CHECK ICC STEERING SWITCH

Turn ignition switch OFF.
Disconnect combination switch (spiral cable) harness connector M303.
Check resistance between combination switch harness connector terminals under the following conditions.

TERMINAL RESISTANCE CHART

Combination switch		Condition	Resistance (Ω)
Connector	Terminals	Condition	Resistance (Ω)
M303	13 and 16	MAIN switch: Pressed	Approx. 0
		CANCEL switch: Pressed	Approx. 310
		DISTANCE switch: Pressed	Approx. 740
		SET/COAST switch: Pressed	Approx. 1, 400
		RESUME/ACCELERATE switch: Pressed	Approx. 2, 600
		All ICC steering switches: Released	Approx. 5, 500

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ICC steering switch