ID Registration Without Transmitter Activation Tool
- With the ignition switch in OFF position, connect CONSULT-III to the Data Link Connector (DLC).
- Turn ignition switch to ON position.
- Select "WORK SUPPORT" on "SELECT DIAG MODE" screen, and select "ID REGIST".
- Adjust the tire pressure of each tire to the value specified in the ID Registration Tire Pressure Specifications table.ID Registration Tire Pressure Specifications
Tire Position Tire Pressure - psi (kPa) Front Left 34 (240) Front Right 31 (220) Rear Right 29 (200) Rear Left 26 (180) - Drive the vehicle at 25 mph (40 km/h) or more for at least 3 minutes.
- After completing all ID registrations, press "END" to complete the procedure.
- Inflate all tires to specification.