Component Function Check

1. CHECK SNOW MODE SWITCH FUNCTION
   1. Turn ignition switch ON.
   2. Select "SNOW MODE SW" in "DATA MONITOR" mode with CONSULT-III.
   3. Check "SNOW MODE SW" indication under the following conditions.
   MONITOR ITEM REFERENCE
   
   

   Monitor item	Condition		Indication
   SNOW MODE SW	Snow mode switch	ON	ON
   		OFF	OFF

   Is the inspection result normal? 

   YES: GO TO 2.

   NO: Go to "DIAGNOSIS PROCEDURE ".

2. CHECK SNOW MODE INDICATOR FUNCTION

1. Turn ignition switch ON.
2. Check the snow mode indicator in the snow mode switch under the following condition.

Is the inspection result normal? 

YES: INSPECTION END

NO: Go to "DIAGNOSIS PROCEDURE ".