Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- PERFORM INITIALIZATION
Perform initialization using CONSULT-III.
For initialization, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
Does steering lock operate?
YES: INSPECTION END
NO: GO TO 2.
- REPLACE STEERING LOCK UNIT
- Replace steering lock unit.
- Perform initialization using CONSULT-III.
For initialization, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
Does steering lock operate?
YES: INSPECTION END
NO: GO TO 3.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
INSPECTION END