CONSULT-III Function (AUTO DRIVE POS.): Notes
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
REFERENCE CHART
| AUTO DRIVE POS. diagnostic mode | Description | Reference |
|---|---|---|
| WORK SUPPORT | Changes settings for each function. | AUTOMATIC DRIVE POSITIONER |
| SELF-DIAG RESULTS | Displays driver seat control unit self-diagnosis results. | "SELF-DIAGNOSIS RESULTS" |
| DATA MONITOR | Displays driver seat control unit input/output data in real time. | "DATA MONITOR" |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. | CAN DIAGNOSIS WITH CONSULT-III |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. | "ACTIVE TEST" |
| ECU PART NUMBER | Driver seat control unit part number can be read. | - |