Intelligent Key Interlock Operation

When pressing unlock button on Intelligent Key or request switch, the system performs memory operation, exiting operation and entry operation.

Operation procedure

1. Press unlock button on Intelligent Key or request switch.
2. The system performs MEMORY OPERATION, and then performs EXITING OPERATION continually.
   NOTE: If the seat position is in memorized position before push unlock button, MEMORY OPERATION dose not perform.
3. Turn ignition switch ON or close driver side door when ignition switch is in "ACC" position.
4. The system performs ENTRY OPERATION. (Seat and steering positions are moved to memorized positions. The memorize position is related to key ID.)

Operation Condition

If the following conditions are not satisfied, memory switch operation is not performed.

• Ignition switch is in OFF position.
• Driver side power seat switch and door mirror control switch are not operated.
• Seat memory switch and set switch are not operated.
• Output malfunction is not detected.
• CAN and UART communications are normal.
• Selector lever position is in P position.
• Detention position switch malfunction is not detected.

  [Detention position switch malfunction is sensed when detention switch remains OFF and vehicle speed is higher than 7 km/h (4 MPH).]

Linking Intelligent Key to the Stored Memory Procedure