Terminals and Reference Values for Automatic Drive Positioner Control Unit
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
AUTOMATIC DRIVE POSITIONER CONTROL UNIT CONNECTOR TERMINAL REFERENCE VALUES
| Terminal | Wire color | Item | Signal Input/Output | Condition | Voltage (V) (Approx) |
|---|---|---|---|---|---|
| 1 | Y | Tilt switch UP signal | Input | Tilt switch is UP operation | 0 |
| Other than above | 5 | ||||
| 5 | L/R | Mirror sensor (RH vertical) signal | Input | When mirror motor RH is UP or DOWN operation | Changes between 4.2 (close to perk) 0.5 (close to valley) |
| 6 | LG | Mirror sensor (LH vertical) signal | Input | When mirror motor LH is UP or DOWN operation | Changes between 4.2 (close to perk) 0.5 (close to valley) |
| 7 | L | Tilt sensor signal | Input | Tilt position: Top | 1 |
| Tilt position: Bottom | 3.8 | ||||
| 9 | LG | Memory switch 1 signal | Input | Memory switch 1 ON | 0 |
| Other than above | 5 | ||||
| 10 | O | UART LINE (TX) | Output | Tilt switch operated | |
| 11 | R | Telescopic switch forward signal | Input | When telescopic switch is forward operation | 0 |
| Other than above | 5 | ||||
| 12 | R/G | Memory switch indictor 1 signal | Input | When illuminate indictor 1 | 1 |
| Other than above | Battery voltage | ||||
| 13 | P | Memory switch indictor 2 signal | Input | When illuminate indictor 2 | 1 |
| Other than above | Battery voltage | ||||
| 14 | L | Mirror motor RH UP signal | Output | When mirror motor RH UP operation | Battery voltage |
| Other than above | 0 | ||||
| 15 | G | Mirror motor RH LEFT signal | Output | When mirror motor RH LEFT operation | Battery voltage |
| Other than above | 0 | ||||
| 16 | W/L | Mirror motor LH DOWN signal | Output | When mirror motor LH DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| Mirror motor LH RIGHT signal | When mirror motor LH RIGHT operation | Battery voltage | |||
| Other than above | 0 | ||||
| 17 | LG | Tilt switch DOWN signal | Input | When tilt switch is DOWN position | 0 |
| Other than above | 5 | ||||
| 21 | SB | Mirror sensor (RH horizontal) signal | Input | When mirror motor RH is LEFT or RIGHT operation | Changes between 3.5 (close to left edge) 0.5 (close to right edge) |
| 22 | O/L | Mirror sensor (LH horizontal) signal | Input | When mirror motor LH is LEFT or RIGHT operation | Changes between 0.5 (close to left edge) 3.5 (close to right edge) |
| 23 | GR | Telescopic sensor input | Input | Telescopic position: Top | 4.6 |
| Telescopic position: Bottom | 0.4 | ||||
| 24 | BR/W | Set switch signal | Input | Set switch ON | 0 |
| Other than above | 5 | ||||
| 25 | LG/B | Memory switch 2 signal | Input | Memory switch 2 ON | 0 |
| Other than above | 5 | ||||
| 26 | P | UART LINE (RX) | Input | Tilt switch is operated | |
| 27 | W | Telescopic switch backward signal | Input | Telescopic switch turned to backward | 0 |
| Other than above | 5 | ||||
| 30 | GR | Mirror motor RH DOWN signal | Output | When mirror motor RH DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| Mirror motor RH RIGHT signal | When mirror motor RH RIGHT operation | Battery voltage | |||
| Other than above | 0 | ||||
| 31 | BR | Mirror motor LH UP signal | Output | When mirror motor LH UP operation | Battery voltage |
| Other than above | 0 | ||||
| 32 | V | Mirror motor LH LEFT signal | Output | When mirror motor LH LEFT operation | Battery voltage |
| Other than above | 0 | ||||
| 33 | W | Sensor power supply | Input | - | 5 |
| 34 | R | Power source (Fuse) | Input | - | Battery voltage |
| 35 | LG | Tilt motor UP signal | Output | Tilt switch is UP operation | Battery voltage |
| Other than above | 0 | ||||
| 36 | P | Telescopic motor forward signal | Output | Telescopic switch is forward operation | Battery voltage |
| Other than above | 0 | ||||
| 39 | L | Power source (C/B) | Input | - | Battery voltage |
| 40 | B | Ground | - | - | 0 |
| 41 | Y | Sensor ground | - | - | 0 |
| 42 | G | Tilt motor DOWN signal | Output | Tilt switch is DOWN operation | Battery voltage |
| Other than above | 0 | ||||
| 44 | G | Telescopic motor backward signal | Output | Telescopic switch is backward operation | Battery voltage |
| Other than above | 0 | ||||
| 48 | B | Ground | - | - | 0 |