Data Monitor
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR ITEM CHART
| Monitor item | Content | ||
|---|---|---|---|
| DR REQ SW | Indicates [ON/OFF] condition of door request switch (driver side). | ||
| AS REQ SW | Indicates [ON/OFF] condition of door request switch (passenger side). | ||
| BD/TR REQ SW | Indicates [ON/OFF] condition of trunk opener request switch. | ||
| ON POS | Indicates [ON/OFF] condition of ignition switch in ON position. | ||
| ACC POS | Indicates [ON/OFF] condition of ignition switch in ACC position. | ||
| DOOR STAT SW | Indicates [ON/OFF] condition of door unlock sensor. | ||
| STOP LAMP SW | Indicates [ON/OFF] condition of stop lamp switch. | ||
| P RANGE SW | Indicates [ON/OFF] condition of park position switch. | ||
| TR CANCEL SW(1) | Indicates [ON/OFF] condition of trunk cancel switch. | ||
| DOOR LOCK SIG(1) | Indicates [ON/OFF] condition of door lock signal from Intelligent Key remote controller button. | ||
| DOOR UNLOCK SIG(1) | Indicates [ON/OFF] condition of door unlock signal from Intelligent Key remote controller button. | ||
| KEYLESS TRUNK(1) | Indicates [ON/OFF] condition of trunk open signal from Intelligent Key remote controller button. | ||
| KEYLESS PANIC(1) | Indicates [ON/OFF] condition of panic alarm signal from Intelligent Key remote controller button. | ||
| DOOR SW DR(1) | Indicates [OPEN/CLOSE] condition of front door switch driver side from BCM via CAN communication line. | ||
| DOOR SW AS(1) | Indicates [OPEN/CLOSE] condition of front door switch passenger side from BCM via CAN communication line. | ||
| DOOR SW RR(1) | Indicates [OPEN/CLOSE] condition of rear door switch LH from BCM via CAN communication line. | ||
| DOOR SW RL(1) | Indicates [OPEN/CLOSE] condition of rear door switch RH from BCM via CAN communication line. | ||
| DOOR BK SW(1) | Indicates [OPEN/CLOSE] condition of back door switch from BCM via CAN communication line. | ||
| TRUNK SW(1) | Indicates [OPEN/CLOSE] condition of trunk room lamp switch from BCM via CAN communication line. | ||
| VEHICLE SPEED(1) | Indicates [km/h] condition of vehicle speed. | ||
|
|||