Service Data
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
POWER STEERING FLUID
POWER STEERING FLUID - SERVICE DATA
| Fluid level rise (Maximum) | 5 mm (0.197 in.) |
| Fluid pressure at idle speed with valve closed | 8336 kPa (85 kgf/cm2 , 1209 psi) |
| Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position | 8336 kPa (85 kgf/cm2 , 1209 psi) |
STEERING WHEEL
STEERING WHEEL - SERVICE DATA
| Steering effort at idle speed (Reference) | 4.9 N*m (50 kgf*cm, 43 in.*lbf) |
VANE PUMP (for 1GR-FE)
VANE PUMP (FOR 1GR-FE) - SERVICE DATA
| Vane pump shaft and vane pump housing oil clearance (Maximum) | 0.07 mm (0.00276 in.) |
| Vane plate thickness (Standard) | 1.405 to 1.411 mm (0.0553 to 0.0556 in.) |
| Clearance between the vane pump rotor groove and vane pump plate (Maximum) | 0.03 mm (0.00118 in.) |
| Compression spring free length (Minimum) | 29.2 mm (1.15 in.) |
| Vane pump rotating torque | 0.27 N*m (2.75 kgf*cm, 2.39 in.*lbf) or less |
VANE PUMP (for 2UZ-FE)
VANE PUMP (FOR 2UZ-FE) - SERVICE DATA
| Vane pump shaft and vane pump housing oil clearance (Maximum) | 0.07 mm (0.00276 in.) |
| Vane plate thickness (Standard) | 1.405 to 1.411 mm (0.0553 to 0.0556 in.) |
| Clearance between the vane pump rotor groove and vane pump plate (Maximum) | 0.03 mm (0.00118 in.) |
| Compression spring free length (Minimum) | 29.2 mm (1.15 in.) |
| Vane pump rotating torque | 0.27 N*m (2.75 kgf*cm, 2.39 in.*lbf) or less |
VANE PUMP (for 3UR-FE)
VANE PUMP (FOR 3UR-FE) - SERVICE DATA
| Vane pump shaft and vane pump housing oil clearance (Maximum) | 0.07 mm (0.00276 in.) |
| Vane plate thickness (Standard) | 1.405 to 1.411 mm (0.0553 to 0.0556 in.) |
| Clearance between the vane pump rotor groove and vane pump plate (Maximum) | 0.03 mm (0.00118 in.) |
| Compression spring free length (Minimum) | 29.2 mm (1.15 in.) |
| Vane pump rotating torque | 0.27 N*m (2.75 kgf*cm, 2.39 in.*lbf) or less |
POWER STEERING LINK
POWER STEERING LINK - SERVICE DATA
| Tie rod end sub-assembly stud bolt turning torque | 1.0 to 3.9 N*m (10 to 40 kgf*cm, 9 to 34 in.*lbf) |
| Total preload (Control valve rotating torque) | 1.5 N*m (15 kgf*cm, 13 in.*lbf) or less |