Torque Specifications

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATIONS

Part tightened	N*m	kgf*cm	ft.*lbf
STEERING COLUMN (for Manual Tilt)
Steering wheel pad set screw ("Torx" screw)	8.8	90	78 in.*lbf
Steering wheel set nut	50	510	37
Control valve shaft x No. 2 intermediate shaft assembly	35	357	26
Steering intermediate shaft assembly x No. 2 intermediate shaft assembly	35	357	26
Steering column assembly x steering intermediate shaft assembly	35	357	26
Steering column assembly set nut and bolt	21	214	15
Column hole cover set bolt	5.0	51	44 in.*lbf
Shift lever set bolt	4.0	40	35 in.*lbf
STEERING COLUMN (for Manual Tilt and Telescopic)
Steering wheel pad set screw ("Torx" screw)	8.8	90	78 in.*lbf
Steering wheel set nut	50	510	37
Control valve shaft x No. 2 intermediate shaft assembly	35	357	26
Steering intermediate shaft assembly x No. 2 intermediate shaft assembly	35	357	26
Steering column assembly x steering intermediate shaft assembly	35	357	26
Steering column assembly set nut and bolt	21	214	15
Column hole cover set bolt	5.0	51	44 in.*lbf
Shift lever set bolt	4.0	40	35 in.*lbf
STEERING COLUMN (for Power Tilt and Power Telescopic)
Steering wheel pad set screw ("Torx" screw)	8.8	90	78 in.*lbf
Steering wheel set nut	50	510	37
Control valve shaft x No. 2 intermediate shaft assembly	35	357	26
Steering intermediate shaft assembly x No. 2 intermediate shaft assembly	35	357	26
Steering column assembly x steering intermediate shaft assembly	35	357	26
Steering column assembly set nut and bolt	21	214	15
Column hole cover set bolt	5.0	51	44 in.*lbf
Shift lever set bolt	4.0	40	35 in.*lbf
Multiplex tilt and telescopic ECU set bolt	1.5	15	13 in.*lbf