Rear Combination Light Assembly: Disassembly

HINT:

• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. REMOVE TAIL AND STOP LIGHT BULB 
   1. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
   Fig 1: Locating Tail And Stop Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bulb from the socket.
2. REMOVE REAR TURN SIGNAL LIGHT BULB 
   1. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
   Fig 2: Locating Rear Turn Signal Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bulb from the socket.
3. REMOVE BACK-UP LIGHT BULB 
   1. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.
   2. Remove the bulb from the socket.
   Fig 3: Locating Back-Up Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002