Rear Combination Light Assembly: Reassembly

HINT:

• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. INSTALL BACK-UP LIGHT BULB 
   1. Install the bulb to the socket.
   Fig 1: Locating Back-Up Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Insert the bulb/socket unit into the combination light.
   3. Turn the bulb/socket unit in the direction indicated by the arrow to install it.
2. INSTALL REAR TURN SIGNAL LIGHT BULB 
   1. Install the bulb to the socket.
   Fig 2: Locating Rear Turn Signal Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Insert the bulb/socket unit into the combination light.
   3. Turn the bulb/socket unit in the direction indicated by the arrow to install it.
3. INSTALL TAIL AND STOP LIGHT BULB 
   1. Install the bulb to the socket.
   2. Insert the bulb/socket unit into the combination light.
   3. Turn the bulb/socket unit in the direction indicated by the arrow to install it.
   Fig 3: Locating Tail And Stop Light Bulb
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002