LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Auto Cruise Control System) >> ICC >> Action Test >> ICC System Running Test >> Vehicle-To-Vehicle Distance Control Mode >> Check For MAIN Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check For MAIN Switch

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine. Then, check if the following operations are performed correctly.
  2. Vehicle-to-vehicle distance control mode is displayed in combination meter illuminates when MAIN switch is pressed "ON" for less than 1.5 seconds and ready for operation. The illumination goes off when MAIN switch is turned to OFF.
  3. "CRUISE" illumination and ICC system display go off when the ignition switch is turned to OFF while MAIN switch is ON ("CRUISE" illumination is ON and vehicle-to-vehicle distance control mode is ready for operation).
    Fig 1: Identifying Cruise Illumination And ICC System Display
    G05223062Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals