Lighting Switch Inspection

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK LIGHTING SWITCH INPUT SIGNAL
CONSULT-III DATA MONITOR
1. Select "AUTO LIGHT SW" of BCM (HEAD LAMP) data monitor item.
2. With operating the lighting switch AUTO, check the monitor status.
When lighting switch is AUTO position : AUTO LIGHT SW ON

CHECK THE COMBINATION SWITCH

Refer to "COMBINATION SWITCH INSPECTION ".

OK or NG

OK: INSPECTION END

NG: Check combination switch (lighting switch). Refer to "COMBINATION SWITCH INSPECTION ".