Consult-III TCM Reprogramming Procedure (ITB09-033)
Publication date: 2009-06-30Reference number: ITB09-033
CONSULT-III TCM REPROGRAMMING PROCEDURE
TECHNICAL SERVICE BULLETIN
Reference Number(s): ITB09-033, Date of Issue:
June 30, 2009
| INFINITI: | 2009 FX50/FX35 (S51), G37 Coupe and Sedan (CV36, V36), M35 (Y50) |
| CLASSIFICATION: | AT09-005 |
| APPLIED VEHICLES: | 2009 FX50/FX35 (S51); 2009 G37 Coupe and Sedan (CV36, V36); 2009 M35 (Y50) |
SERVICE INFORMATION
A complete step-by-step General Procedure for C-III TCM Reprogramming is now available from Infiniti by hyperlink.
This General Procedure is also available via hyperlink from specific C-III symptom-based Technical Service Bulletins in ASIST.
CAUTION:
BEFORE STARTING REPROGRAMMING
- Connect a battery charger to the vehicle battery.
If the 12V battery voltage drops during reprogramming, the TCM may be damaged.
- Be sure to turn OFF all vehicle electrical loads.
If a vehicle electrical load remains ON, the TCM may be damaged.
- For TCM reprogramming, the C-III MUST be connected to the VI using the USB cable.
- Be sure to connect the AC Adapter.
If the C-III battery voltage drops during reprogramming, the process will be interrupted and the TCM will be damaged.