Steering Outer Socket And Inner Socket

STEERING GEAR SPECIFICATION

Steering gear type		PR26AF
Outer socket	Swinging torque	0.1 - 2.9 N.m (0.01 - 0.29 kg-m, 1 - 25 in-lb)
	Measurement on spring balance Measuring point at cotter pin hole of stud	1.5 - 42.7 N (0.16 - 4.35 kg, 0.34 - 9.59 lb)
	Rotating torque	0.1 - 2.9 N.m (0.01 - 0.29 kg-m, 1 - 25 in-lb)
	Axial end play	0.5 mm (0.020 in) or less
Inner socket	Swinging torque	0.1 - 7.8 N.m (0.01 - 0.79 kg-m, 1 - 69 in-lb)
	Measurement on spring balance Measuring point at *mark shown in the figure	1.4 - 105.4 N (0.15 - 10.75 kg, 0.32 - 23.69 lb)
	Axial end play	0.2 mm (0.008 in) or less
Inner socket length		63.9 mm (2.516 in) (2WD) 55.2 mm (2.173 in) (AWD)