Special Service Tool

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOL DESCRIPTION CHART

Tool number (Kent-Moore No.) Tool name		Description
ST27862000 (-) Drift 62.5 mm (2.461 in) dia. 42 mm (1.65 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front oil seal
KV381054S0 (J-34286) Puller	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear oil seal
ST30720000 (J-25405) Drift 77 mm (3.03 in) dia. 55.5 mm (2.185 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing rear oil seal Installing mainshaft oil seal
KV40104830 (-) Drift 70 mm (2.76 in) dia. 63.5 mm (2.500 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing rear oil seal
KV38100300 (J-25523) Drift 54 mm (2.13 in) dia. 46 mm (1.81 in) dia. 32 mm (1.26 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft bearing
ST33052000 (-) Drift 28 mm (1.10 in) dia. 22 mm (0.87 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing mainshaft assembly
ST30611000 (J-25742-1) Drift bar 350 mm (1.10 in) 25 mm (1.10 in) dia. M12 x 1.5P	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear bearing
ST35321000 (-) Drift 49 mm (1.93 in) dia. 41 mm (1.61 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing rear bearing Installing mainshaft assembly
ST31214000 (J-25269-B) Drift 34 mm (1.34 in) dia. 25.5 mm (1.004 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Removing front drive shaft front bearing Removing front drive shaft rear bearing
KV38104010 (-) Drift 67 mm (2.64 in) dia. 49 mm (1.93 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft rear bearing Installing rear bearing
ST33200000 (J-26082) Drift 60 mm (2.36 in) dia. 44.5 mm (1.752 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing front drive shaft front bearing
ST30621000 (J-25742-5) Drift 80 mm (3.15 in) dia. 59 mm (2.32 in) dia.	Courtesy of NISSAN MOTOR CO., U.S.A.	Installing mainshaft bearing