CONSULT-III Function (BCM) P: Notes
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC TEST MODES REFERENCE CHART
| BCM diagnostic test item | Check item, diagnostic test mode | Content |
|---|---|---|
| Inspection by part | Work Support | Changes setting of each function. |
| Self-Diagnostic Result | BCM performs self-diagnosis of CAN communication. | |
| Data Monitor | Displays the input data of BCM in real time. | |
| Can Diag Support Monitor | The result of transmit/receive diagnosis of CAN communication can be read. | |
| Active Test | Gives a drive signal to a load to check the operation. | |
| Ecu Identification | BCM part number can be read. |