Terminal and Reference Value for Combination Meter

COMBINATION METER TERMINAL AND REFERENCE VALUE

Terminal No.	Wire color	Item	Condition		Reference value (Approx.)
			Ignition switch	Operation or condition
1	LG	Vehicle speed signal (8-pulse)	ON	Speedometer operated [When vehicle speed is approx. 40 km/h (25 MPH)]	NOTE: Maximum voltage may be 5 V due to specifications (connected units). Courtesy of NISSAN MOTOR CO., U.S.A.
2	L	ACC power supply	ACC	-	Battery voltage
9	B	Ground	ON	-	0 V
10
11
12	BR	Ignition signal	ON	-	Battery voltage
13	R/L	Illumination (+)	ON	Lighting switch is turned ON.	12 V
				Lighting switch is turned OFF.	0 V
14	B/W	Illumination signal input	ON	Lighting switch is turned ON, and illumination control switch is operated.	< e.g. > When brightness level is midway Courtesy of NISSAN MOTOR CO., U.S.A.
				Lighting switch is turned OFF.	0 V
15	R	RX communication line (From unified meter and A/C amp.)	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
16	G	TX communication line (To unified meter and A/C amp.)	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
23	W/G	Battery power supply	OFF	-	Battery voltage