Initialization Procedure
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
If the sunroof does not close or open automatically, use the following procedure to return sunroof operation to normal.
- Close the sunroof if it is not in the closed position. It may be necessary to repeatedly push the switch to close the sunroof.
- Press and hold the TILT UP switch. Do not release the switch, keep pressure on it. After 10 seconds of depressing, the sunroof will tilt up, then stop. Release the button.
- Press and hold the TILT UP switch again. Do not release the switch, keep pressure on it. While depressing the switch, the sunroof will "Tilt down" "Slide open" "Slide close". Release the button after the sunroof "Tilt down" and stops.
- Initializing procedure is complete. Confirm proper operation of the sunroof.