LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Transfer Case) >> Transfer Assembly >> Disassembly and Assembly >> Assembly >> Mainshaft Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mainshaft Assembly

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install needle bearing to mainshaft.
    CAUTION: Apply ATF to periphery of needle bearing.
  2. Install sprocket and electric controlled coupling to mainshaft.
  3. Install spacer to main shaft.
    Fig 1: Applying ATF To Periphery Of Needle Bearing
    G05225383Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Install snap ring to mainshaft.
    CAUTION: Do not reuse snap ring.
  5. Install mainshaft assembly to rear case, then install front case and rear case. Refer to "FRONT CASE AND REAR CASE ".
    Fig 2: Identifying Snap Ring To Mainshaft
    G05225371Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals