AFS OFF Indicator Does Not Operate

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DIAGNOSIS RESULT (AFS CONTROL UNIT)
Select "ADAPTIVE LIGHT" on CONSULT-III. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.

Is DTC detected?

Yes: Refer to "SELF-DIAG RESULTS ".

NO: GO TO 2.
CHECK DIAGNOSIS RESULT (UNIFIED METER AND A/C AMP.)
Select "METER A/C AMP" on CONSULT-III. Select "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.

Is DTC detected?

Yes: Refer to SELF-DIAG RESULTS .

NO: GO TO 3.

CHECK AFS OFF INDICATOR SIGNAL (UNIFIED METER AND A/C AMP.)

CONSULT-III DATA MONITOR

Select "AFS OFF IND"of METER A/C AMP data monitor item
With operating the AFS switch, check the monitor status.

DATA MONITOR CHART

Condition	"AFS OFF IND"
AFS switch is OFF.	ON
AFS switch is ON.	OFF

OK or NG

OK: Replace combination meter.

NG: Replace unified meter and A/C amp.