Terminals and Reference Values for AFS Control Unit
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES CHART
| Terminal No. | Wire color | Item | Measuring condition | Reference value | ||
|---|---|---|---|---|---|---|
| Ignition switch | Operation or condition | |||||
| 1 | B/R | IGN power supply | ON | - | Battery voltage | |
| 2 | W/R | Swivel position sensor ground (right) | ON | - | Approx. 0 V | |
| 3 | GR | AFS switch signal | ON | AFS switch | ON | Approx. 0 V |
| OFF | Battery voltage | |||||
| 4 | Y | Swivel position sensor power supply (right) | ON | - | Approx. 5 V | |
| 6 | V/W | Height sensor power supply | ON | - | Approx. 5 V | |
| 7 | P | CAN-L | - | - | - | |
| 8 | B/R | Height sensor ground | ON | - | Approx. 0 V | |
| 9 | W/B | Swivel position sensor signal (right) | ON | Low beam headlamp (right) swivel angle | 0° | Approx. 1.5 V |
| Maximum angle | Approx. 2.5 V | |||||
| 11 | R | Swivel motor 1 phase - (right) | ON | Low beam headlamp (right) swivel | ON | |
| 13 | B | Swivel motor 2 phase - (right) | ON | OFF | Approx. 9.5 - 11.5 V | |
| 15 | BR/L | Swivel motor 1 phase+ (left) | ON | Low beam headlamp (left) swivel | ON | |
| 17 | Y/G | Swivel motor 2 phase+ (left) | ON | OFF | Approx. 9.5 - 11.5 V | |
| 19 | V | Aiming motor drive signal (right) | ON | Low beam headlamp (right) auto aiming | Unloaded vehicle position | Approx. 9 V |
| Maximum laden condition | Approx. 4.8 V (With 18 - inch wheel) Approx. 5.2 V (With 19 - inch wheel) |
|||||
| 24 | V/R | Swivel position sensor power supply (left) | ON | - | Approx. 5 V | |
| 25 | B | Ground | ON | - | Approx. 0 V | |
| 27 | R/W | Swivel position sensor ground (left) | ON | - | Approx. 0 V | |
| 28 | BR | Height sensor signal | ON | Vehicle height | Unloaded vehicle position | Approx. 2.5 V |
| Maximum laden condition | Approx. 1.0 V (With 18- inch wheel) Approx. 1.3 V (With 19 - inch wheel) |
|||||
| 29 | L/Y | Swivel position sensor signal (left) | ON | Low beam headlamp (left) swivel angle | 0° | Approx. 1.5 V |
| Maximum angle | Approx. 3.5 V | |||||
| 30 | L | CAN-H | - | - | - | |
| 32 | W | Swivel motor 2 phase+ (right) | ON | Low beam headlamp (right) swivel | ON | |
| 34 | G | Swivel motor 1 phase+ (right) | ON | OFF | Approx. 9.5 - 11.5V | |
| 36 | Y/L | Swivel motor 2 phase - (left) | ON | Low beam headlamp (left) swivel | ON | |
| 38 | W/L | Swivel motor 1 phase - (left) | ON | OFF | Approx. 9.5 - 11.5 V | |
| 40 | O | Aiming motor drive signal (left) | ON | Low beam headlamp (left) auto aiming | Unloaded vehicle position | Approx. 9 V |
| Maximum laden condition | Approx. 4.8 V (With 18 -inch wheel) Approx. 5.2 V (With 19 -inch wheel) |
|||||