DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
HINT:
- When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
- Use the Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical/Occupant Detection/Trouble Codes.
  
  Fig 1: Identifying Passenger Airbag ON/OFF Indicator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical/Occupant Detection/Trouble Codes.
5. Erase the DTCs.