DTC Check/Clear
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the Techstream on.
- Enter the following menus: Body/Tilt & Telescopic/Trouble Codes.
- Read the DTCs.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the Techstream on.
- Enter the following menus: Body/Tilt & Telescopic/Trouble Codes.
- Clear the DTCs.