Diagnostic Trouble Code Table

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the table below.

Power tilt and power telescopic steering column system

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

DTC Code	Detection Item	Trouble Area
B2602	Key Unlock Warning Switch Circuit Malfunction	Unlock warning switch Unlock warning switch circuit Main body ECU Multiplex tilt and telescopic ECU
B2603	Tilt and Telescopic Manual Switch Circuit Malfunction	Tilt and telescopic manual switch Tilt and telescopic manual switch circuit Multiplex tilt and telescopic ECU
B2610	Tilt Position Sensor or Tilt Motor Circuit Malfunction	Harness or connector Tilt position sensor or tilt motor Multiplex tilt and telescopic ECU
B2611	Telescopic Position Sensor or Telescopic Motor Circuit Malfunction	Harness or connector Telescopic position sensor or telescopic motor Multiplex tilt and telescopic ECU
B2620	ECU Power Source Circuit Malfunction	Battery Harness or connector Multiplex tilt and telescopic ECU
B2621	Communication Interruption	CAN communication system Main body ECU Front power seat control ECU and switch LH Combination meter Multiplex tilt and telescopic ECU
B2624	Vehicles Speed Malfunction	CAN communication system Combination meter Multiplex tilt and telescopic ECU