Freeze Frame Data
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- FREEZE FRAME DATA
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON and check the freeze frame data by following the prompts on the Techstream screen.
Tilt & Telescopic
FREEZE FRAME DATA - TILT & TELESCOPICTester Display Measurement Item/Range Normal Condition Diagnostic Note Tilt Position Current tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Telesco Position Current telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Tilt Return Position Memorized tilt return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Telesco Return Position Memorized telescopic return position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Tilt Up Limit Position Uppermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Tilt Down Limit Position Lowermost tilt position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Telesco Short Limit Pos Shortest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Telesco Long Limit Pos Longest telescopic position data/min.: 0000 H (0 edges), max.: FFFF H (65535 edges) 7000 to 9000 H (28672 to 36864 edges) - Tilt Up Switch Input state of tilt up by manual switch/ON or OFF ON: Tilt up is activated by manual switch
OFF: Tilt up is not activated by manual switch- Tilt Up SW (CAN) Communication state of tilt up input by manual switch/ON or OFF ON: Tilt up is activated by manual switch
OFF: Tilt up is not activated by manual switch- Tilt Down Switch Input state of tilt down by manual switch/ON or OFF ON: Tilt down is activated by manual switch
OFF: Tilt down is not activated by manual switch- Tilt Down SW (CAN) Communication state of tilt down input by manual switch/ON or OFF ON: Tilt down is activated by manual switch
OFF: Tilt down is not activated by manual switch- Telesco Short Switch Input state of telescopic short by manual switch/ON or OFF ON: Telescopic short is activated by manual switch
OFF: Telescopic short is not activated by manual switch- Telesco Short SW (CAN) Communication state of telescopic short input by manual switch/ON or OFF ON: Telescopic short is activated by manual switch
OFF: Telescopic short is not activated by manual switch- Telesco Long Switch Input state of telescopic long by manual switch/ON or OFF ON: Telescopic long is activated by manual switch
OFF: Telescopic long is not activated by manual switch- Telesco Long SW (CAN) Communication state of telescopic long input by manual switch/ON or OFF ON: Telescopic long is activated by manual switch
OFF: Telescopic long is not activated by manual switch- T&T Manual SW Data Voltage data of manual switch/min.: 0 V, max.: 5 V Neutral position: Below 0.2 V
Tilt up: 1.67 to 2.13 V
Tilt down: 0.54 to 0.74 V
Telescopic contract: 1.08 to 1.40 V
Telescopic extend: 2.22 to 2.77 V- Power Source Voltage Voltage data of power supply/min.: 0 V, max.: 20 V Actual power supply voltage 11 to 14 V - Freeze Speed Info Vehicle speed data/min: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed - IG Switch (CAN) Communication state of ignition switch/ON or OFF ON: Communication is normal
OFF: Communication is interrupted- Key Switch (CAN) Communication state of key switch signal/ON or OFF ON: Communication is normal
OFF: Communication is interrupted- Key Code Confirm (CAN) Communication state of key code confirmation signal/ON or OFF ON: Communication is normal
OFF: Communication is interrupted- The Number of DTCs Number of diagnostic trouble codes/min.: 0, max.: 255 Actual number of diagnostic trouble codes -