VSC Off Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) (See REMOVAL )
REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) (See )
REMOVE COWL SIDE TRIM BOARD LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH (See REMOVAL )
REMOVE VSC OFF SWITCH
1. Disconnect the VSC OFF switch connector.
2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the lower instrument panel finish panel LH.
  
  Fig 1: Detaching Claws Using Screwdriver
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002