Automatic Light Control Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
1. for Column Shift Type:
  Remove the instrument panel (see REMOVAL ).
2. for Floor Shift Type:
  Remove the instrument panel (see REMOVAL ).
REMOVE AUTOMATIC LIGHT CONTROL SENSOR
1. Disconnect the connector.
2. Remove the 2 claws and sensor.
  
  Fig 1: Locating Automatic Light Control Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002