Headlight Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH side.
The procedures listed below are for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS )

INSTALL HEADLIGHT ASSEMBLY LH
1. Connect the connectors and install the headlight.
2. Install the 2 screws and bolt.
Fig 1: Identifying Headlight Assembly Screws And Bolt LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT END PANEL LH (See INSTALLATION )