DTC Check / Clear

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the tester on.
4. Enter the following menus:
  1. Techstream - Select: Body / Main Body / Trouble Codes.
5. Read the DTCs.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the tester on.
  1. Techstream - Select: Body / Main Body / Trouble Codes.
4. Erase the DTCs.