Data List / Active Test
- DATA LIST
HINT:
Using the Techstream to read the DATA LIST allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus:
- Techstream - Select: Body / Main Body / Data List.
- According to the display on tester, read the "DATA LIST".
- Techstream
Main Body
MAIN BODY - DATA LIST CHARTTester Display Measurement Item/Range Normal Condition Diagnostic Note D Dor Cty SW Front door courtesy light switch LH signal / ON or OFF ON: Front door courtesy light switch LH ON
OFF: Front door courtesy light switch LH OFF- P Dor Cty SW Front door courtesy light switch RH signal / ON or OFF ON: Front door courtesy light switch RH ON
OFF: Front door courtesy light switch RH OFF- RL Dor Cty SW Rear door courtesy light switch LH signal / ON or OFF ON: Rear door courtesy light switch LH ON
OFF: Rear door courtesy light switch LH OFF- RR Dor Cty SW Rear door courtesy light switch RH signal / ON or OFF ON: Rear door courtesy light switch RH ON
OFF: Rear door courtesy light switch RH OFF- Cargo Light Cargo light switch signal / ON or OFF ON: Cargo light ON
OFF: Cargo light OFF- Dimmer SW Dimmer switch signal / ON or OFF ON: Dimmer switch ON
OFF: Dimmer switch OFF- High Flasher SW Passing light switch signal / ON or OFF ON: Passing light switch ON
OFF: Passing light switch OFF- F Fog Light SW Front fog light switch signal / ON or OFF ON: Front fog light switch ON
OFF: Front fog light switch OFF- Auto Light SW Auto light switch signal / ON or OFF ON: Auto light switch ON
OFF: Auto light switch OFF- Head Light SW Headlight switch signal / ON or OFF ON: Headlight switch ON
OFF: Headlight switch OFF- Tail Light SW Taillight switch signal / ON or OFF ON: Taillight switch ON
OFF: Taillight switch OFF- Illumination Rate Illumination rate / min.: 0, max.: 99.99 Actual illumination rate is displayed -
- Techstream
- ACTIVE TEST
HINT:
Using the Techstream to perform ACTIVE TESTs allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing ACTIVE TESTs early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TESTs.
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester on.
- Enter the following menus:
- Techstream - Select: Body / Main Body / Active Test.
- According to the display on tester, perform the "ACTIVE TEST".
- Techstream
Main Body
MAIN BODY - ACTIVE TEST CHARTTester Display Test Part Control Range Diagnostic Note Illumi Output Illumination light ON or OFF - Tail Light Taillight ON or OFF - Head Light Headlight ON or OFF - Head Light (Hi) Headlight (High) ON or OFF - F Fog Light Rly Front fog light ON or OFF - Cargo Lgt Cargo light ON or OFF Cargo light switch is DOOR or ON
- Techstream