Rear Leaf Spring: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SPRING LEAF BUSH
1. Install a new bush to the leaf spring.
  1. Install the bushing while aligning it with the matchmarks so that its openings are as shown in the illustration.
    NOTE: Be sure to install each bushing to the correct positions.
2. Use SST and a press, press both bushes into the leaf spring.
  
  Fig 1: Pressing Both Bushes Into Leaf Spring Using SST
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09710-28012 (09710-07062), 09710-30041 (09710-03211)
  
  NOTE: Align SST, which presses the bush, to the outer casing of the bush.