LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Audio System & Visual System) >> Steering Pad Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Pad Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Attach the 4 pins to install the switch with the 2 screws.
    2. Connect the connector.
  2. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  3. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  4. INSTALL STEERING PAD  (See INSTALLATION )
    Fig 1: Identifying Steering Pad Switch Pins
    G05156530Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  6. INSPECT STEERING PAD  (See INSTALLATION )
  7. CHECK SRS WARNING LIGHT  (See INSTALLATION )
scientia non olet · About LEMON Manuals