Stereo Component Amplifier: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Set the bracket's aligning protrusion labeled A into the floor's hole.
2. Install the amplifier with the 3 bolts.
  HINT:
  
  Tighten the bolts in the order shown in the illustration.
  
  Fig 1: Locating Stereo Component Amplifier Assembly Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 3 connectors.
INSTALL AUDIO AMPLIFIER COVER
1. Set the cover on the stereo amplifier assembly.
2. Attach the 3 clips.
INSTALL FRONT SEAT ASSEMBLY RH
1. for Manual Seat:
  Install the front seat RH (see INSTALLATION ).
2. for Power Seat:
  Install the front seat RH (see INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).