Television Display: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TELEVISION DISPLAY BRACKET
1. Attach the clip and 2 claws to install the bracket.
2. Install the 4 bolts.
  HINT:
  
  Install the bolts in the order shown in the illustration.
  
  Fig 1: Identifying Television Display Bracket Bolts, Clip And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF HEADLINING ASSEMBLY (for CrewMax)
1. Install the roof headlining (see INSTALLATION ).
INSTALL TELEVISION DISPLAY ASSEMBLY
1. Attach the 2 clips and 2 claws to install the television display.
2. Install the 4 bolts.
  HINT:
  
  Install the bolts in the order shown in the illustration.
  
  Fig 2: Identifying Television Display Bolts, Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOM NO. 1 LIGHT ASSEMBLY
1. Attach the 4 clips to install the light.
  NOTE: Do not damage the design surface of the television display when you install the light.
  
  Fig 3: Identifying Light Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).