Data List / Active Test

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. According to the display on Techstream, read the "Data List".

   Main Body: 

   MAIN BODY - TECHSTREAM TESTER DISPLAY REFERENCE CHART
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door Courtesy SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
   P Door Courtesy SW	Front passenger side door courtesy switch signal / ON or OFF	ON: Front passenger door open OFF: Front passenger door closed	-

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Turn the ignition switch ON.
2. Turn the Techstream on.
3. Enter the following menus: Body Electrical / Main Body / Active Test.
4. According to the display on Techstream, perform the "Active Test".

   Main Body: 

   MAIN BODY - TECHSTREAM TESTER DISPLAY REFERENCE CHART
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   IG OFF P/W Control Permission Output	Power window control permission output	ON or OFF	-