Terminals and Reference Value for Display Control Unit
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUE FOR DISPLAY CONTROL UNIT
| Terminal (Wire color) | Item | Signal input/output | Condition | Reference value | ||
|---|---|---|---|---|---|---|
| + | - | Ignition switch | Operation | |||
| 1 (W/L) | Ground | Battery power supply | Input | OFF | - | Battery voltage |
| 2 (W/G) | Ground | Power supply (Inverter) | Output | ON | - | Approx. 9 V |
| 3 (B) | Ground | Ground | - | ON | - | Approx. 0 V |
| 4 (BR/W) | Ground | Power supply (Signal) | Output | ON | - | Approx. 9 V |
| 5 (P) | Ground | Ground (Inverter) | - | ON | - | Approx. 0 V |
| 6 (OR) | Ground | Reverse signal | Input | ON | Selector lever in R position | Approx. 12 V |
| Selector lever except in R position | Approx. 0 V | |||||
| 7 (P/L) | Ground | Ground (Signal) | - | ON | - | Approx. 0 V |
| 10 (LG) | Ground | ACC power supply | Input | ACC | - | Battery voltage |
| 12 (W) | Ground | Ignition signal | Input | ON | - | Battery voltage |
| 13 (B) | Ground | Ground | - | ON | - | Approx. 0 V |
| 14 (R/L) | Ground | Illumination signal | Input | OFF | Lighting switch ON | Approx. 12 V |
| Lighting switch OFF | Approx. 0 V | |||||
| 16 (G) | Ground | Vehicle speed signal (8-pulse) | Input | ON | When vehicle speed is approx. 25 MPH (40 km/h) |
NOTE:
Maximum voltage may be 5 V due to specifications (connected units).
|
| 25 (L) | - | CAN-H | - | - | - | - |
| 26 (P) | - | CAN-L | - | - | - | - |
| 28 (PU) | Ground | Communication signal (+) | Input/Output | ON | - | |
| 29 | - | Shield | - | - | - | - |
| 30 (LG) | Ground | Communication signal (-) | Input/Output | ON | - | |
| 32 (L) | Ground | Communication signal (+) | Input/Output | ON | - | |
| 33 | - | Shield | - | - | - | - |
| 34 (P) | Ground | Communication signal (-) | Input/Output | ON | - | |
| 36 (PU) | Ground | Communication signal (DCU-DSP) | Output | ON | - | |
| 37 | - | Shield | - | - | - | - |
| 38 (LG) | Ground | Communication signal (DSP-DCU) | Input | ON | - | |
| 39 | - | Shield | - | - | - | - |
| 40 (LG) | Ground | Communication signal (DCU-AUD) | Output | ON | Operate audio volume switch | |
| 41 | - | Shield | - | - | - | - |
| 42 (PU) | Ground | Communication signal (AUD-DCU) | Input | ON | Operate audio volume switch | |
| 43 (G) | Ground | RGB synchronizing signal | Input | ON | When displaying RGB image | |
| 44 (W) | Ground | RGB signal (R: red) | Input | ON | Start Confirmation/Adjustment (Navigation) mode, and then display color bar by selecting "Color Spectrum bar" on Display Diagnosis screen | |
| 45 | - | Shield | - | - | - | - |
| 46 (R) | Ground | RGB signal (G: green) | Input | ON | Start Confirmation/Adjustment (Navigation) mode, and then display color bar by selecting "Color Spectrum bar" on Display Diagnosis screen | |
| 47 | - | Shield | - | - | - | - |
| 48 (B) | Ground | RGB signal (B: blue) | Input | ON | Start Confirmation/Adjustment (Navigation) mode, and then display color bar by selecting "Color Spectrum bar" on Display Diagnosis screen | |
| 49 | - | Shield | - | - | - | - |
| 50 (G) | Ground | RGB signal (R: red) | Output | ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen | |
| 51 (B) | Ground | RGB area (YS) signal | Output | ON | Set the selector lever in R position, and then display the rear view image | |
| 52 (Y) | Ground | RGB signal (G: green) | Output | ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen | |
| 53 (W) | Ground | Vertical synchronizing (VP) signal | Input | ON | - | |
| 54 (L) | Ground | RGB signal (B: blue) | Output | ON | Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen | |
| 55 (R) | Ground | Horizontal synchronizing (HP) signal | Input | ON | - | |
| 56 (G) | Ground | RGB synchronizing signal | Output | ON | When displaying RGB image | |