Terminals and Reference Value for Display

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

TERMINALS AND REFERENCE VALUE FOR DISPLAY

Terminal (Wire color)		Item	Signal input/output	Condition		Reference value
+	-	Item	Signal input/output	Ignition switch	Operation	Reference value
1 (B)	Ground	Ground	-	ON	-	Approx. 0 V
2 (W/G)	Ground	Power supply (Inverter)	Input	ON	-	Approx. 9 V
3 (BR/W)	Ground	Power supply (Signal)	Input	ON	-	Approx. 9 V
6 (Y)	Ground	RGB signal (G: green)	Input	ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen	Courtesy of NISSAN MOTOR CO., U.S.A.
7	-	Shield	-	-	-	-
8 (R)	Ground	Horizontal synchronizing (HP) signal	Output	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
9 (B)	Ground	RGB area (YS) signal	Input	ON	Set the selector lever in R position, and then display the rear view image	Courtesy of NISSAN MOTOR CO., U.S.A.
11 (PU)	Ground	Communication signal (DCU-DSP)	Input	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
13 (P)	Ground	Ground (Inverter)	-	ON	-	Approx. 0 V
14 (P/L)	Ground	Ground (Signal)	-	ON	-	Approx. 0 V
17 (G)	Ground	RGB signal (R: red)	Input	ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen	Courtesy of NISSAN MOTOR CO., U.S.A.
18 (L)	Ground	RGB signal (B: blue)	Input	ON	Start Confirmation/Adjustment mode, and then display color bar by selecting "Display Color Spectrum Bar" on Display Diagnosis screen	Courtesy of NISSAN MOTOR CO., U.S.A.
19 (G)	Ground	RGB synchronizing signal	Input	ON	When displaying RGB image	Courtesy of NISSAN MOTOR CO., U.S.A.
20 (W)	Ground	Vertical synchronizing (VP) signal	Output	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
21	-	Shield	-	-	-	-
22 (LG)	Ground	Communication signal (DSP-DCU)	Output	ON	-	Courtesy of NISSAN MOTOR CO., U.S.A.
23	-	Shield	-	-	-	-