Remote Control Entry System Operation
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
When the remote control entry system is triggered by input from key fob, BCM output turn signal from BCM terminals 45 and 46, interpreting it as turn signal is ON.
Connected from BCM terminals 45 and 46 to front combination lamp RH and LH terminals 4.
Turn signal lamp turns ON
- through front combination lamp RH and LH terminals 8
- to grounds E21, E50 and E51.
Connected form BCM terminals 45 and 46 to rear combination lamp control unit terminals 4 and 5.
Rear turn signal (LED) turns ON
- through rear combination lamp control unit terminal 11
- to rear combination lamp LH terminal 3,
- through rear combination lamp LH terminal 4
- to rear combination lamp control unit terminal 10,
- through rear combination lamp control unit terminal 9
- to rear combination lamp RH terminal 3,
- through rear combination lamp RH terminal 4
- to rear combination lamp control unit terminal 8.
BCM sends signal to the unified meter and A/C amp. through the CAN communication, and turns ON turn signal indicator lamp with combination meter.
With power and input supplied, BCM controls the flashing of hazard warning lamps when key fob is used to activate remote control entry system.